+39 351 844 9372 info@minipalogeosystem.it

Minipalo GEOSYSTEM®

non-invasive consolidation

Injectable expansive mortar GEO XP

Specific expansive cement mortar for the injection of Minipalo GEOSYSTEM®

Description

High-diffusion, cement-based premixed binder with high expansive characteristics (from 80 to 120% depending on the water / product ratio used) for the consolidation of soils, with an eco-friendly formulation. The product is ready for use and with the only addition of water, it allows you to create lightweight cellular cementitious grouts for on-site expansion. After the expansion phase, the product maintains its volume and is not subject to important shrinkage phenomena, it is compact and waterproof.

Application fields

Specifically formulated for the injection of the minipole tecnology® Geosystem; it can also be used for the consolidation of the tunnel excavation front and for trench excavations, for consolidating friable and inconsistent escarpments and soils, for filling cavities or cavities, to reduce the hydraulic permeability of the soils and on piling systems. Thanks to its expansion characteristics, the product ensures a high diffusion of the mixture within the soil, ensuring a high degree of static compactness.

Preparation and application of the product

Mix the product with a special continuous cycle mixer in order to obtain a mixture of fluid / pseudoplastic consistency. The optimal water / product ratio, depending on the ambient temperature, will vary from 45 to 50 liters of clean water, for every 100 kg of product. The quantities of product to be prepared, time by time, must be defined in advance on the basis of the construction site needs and the relative application times. The injection of the product into the soil is carried out with injection pumps.

Method of use

Mix the product with a special continuous cycle mixer in order to obtain a mixture of fluid / pseudoplastic consistency. The optimal water / product ratio, depending on the ambient temperature, will vary from 45 to 50 liters of clean water, for every 100 kg of product. The quantities of product to be prepared, time by time, must be defined in advance on the basis of the construction site needs and the relative application times. The injection of the product into the soil is carried out with injection pumps.

Packaging and storage

Geo XP is supplied in 20 kg / cd bags. The product in its original packaging, stored in a closed and dry place, retains its characteristics for 12 months. Avoid frost.

Technical sheet

Appearence: POWDER Color: GRAY

Application temperature: +5 / +35 °C

Hazard classification 1999/45/CE – 67/548/CEE: irritating

Solid residue – UNI EN 480-8: 100%

Specific weight – UNI EN ISO 758: 1,35 kg/l

Mixing water: da 45 a 50%

Yield after maximum free expansion: 550/650 KG OF PRODUCT FOR M3 OF CONGLOMERATE

Final density (after expansion): 900 KG/M3

Free expansion (in water / product volume equal to 0.5): 80 ÷ 120%

Compressive strength in free expansion a 28 gg – EN 196: 7/10 MPa

Request information

To request information about the product, fill out the form, you will be contacted within 24/48 hours.

Thank you.

+39 351 844 9372
info@minipalogeosystem.it
  • Contact

  • Company

  • Request

Use of Minipalo GEOSYSTEM®

The EDILSYSTEM srl system, a new and efficient system of consolidation with patent, named “MINIPALO GEO-SYSTEM®”, that appears as a valid alternative to classic minipoles.