Minipalo GEOSYSTEM®
Self-drilling bars
Specific reinforcing bars for Minipalo GEOSYSTEM®
Description
The self-drilling bars are equipped with a continuous thread, obtained by cold rolling by a smooth tube; perform a threefold action, drilling rod, injection duct, sealing and connecting member by means of valve and non-valve jointed sleeves. The particular thread, according to ISO 10208 standards, increases the adhesion between steel and concrete or the specific polyurethane resin for injection.
Ideal for realizing all possible uses of the Geosystem minipalo tecnology® (riveting – anchoring – micropiles ) both in soil and in rock.
Technical sheet
kN
kN
mm2
kg/ml
mm
mm
The threads type R32 – R38 – R51 are made according to ISO 10208 standards.
Other diameters of bars with different mechanical strengths can be supplied on request.
The ends of all the self-drilling bars are turned at 90 ° in order to ensure optimal transmission of the percussion energy and beveled at 45 ° to facilitate screwing.
The threads type R32 – R38 – R51 are made according to ISO 10208 standards.
Other diameters of bars with different mechanical strengths can be supplied on request.
The ends of all the self-drilling bars are turned at 90 ° in order to ensure optimal transmission of the percussion energy and beveled at 45 ° to facilitate screwing.
Request information
To request information about the product, fill out the form, you will be contacted within 24/48 hours.
Thank you.